MiVoice 400 DoS Blacklist

Asstra 67xxi phones ceased to function for a while and then resumed working. Under Event Logs it showed the phone was Blacklisted (often repeatedly) for DoD reasons. The following seems to have fixed it:

Set the Keep Alive to 120 and registration timer to 3600. 

MiVoice 470 ISDN Dial up Access

1. Setup ISDN Modem
2. Mitel 400 -> Configuration -> Routing -> Select a DDI number

-> CDE = Remote management (SRM).

3. Create a user for Admin access or use existing user.

4. On Windows -> Create a VPN (Set up a connection -> Connect to a workplace)

-> Number = DDI number, user and password = as per that on the A470.

5. Connect. Use ipconfig /all to view assigned IP address.

6. Open a Web browser and enter the VPN IP of the PBX.

MX-ONE Number Presentation 2

On a client using a Primary Rate ISDN, the CLOP was incorrect because the circuit numbering "clashed" with the extension numbering:

- 3125xxx is the DID range.
- 5xxx is the extension range (thus no DID tables need to be setup)
- 31255xxx is the resulting displayed CLOP

number_conversion_initiate -conversiontype 1 -numbertype 10 -entry 5 -truncate 1

The above removed the extra 5 for each extension as they call out.

It is worth noting that:
1. I did not use RONDI.
2. I set the Public Exchange number (=312) and Common Public Directory Number (=312) in the Web GUI (MTS)