Had a recent problem with an MX-ONE using a DBC 4224 as an operator (a dated method, but the client's choice). The system was equipped with ELU33 and MGU2. Once programmed, the phone started fine and showed "Night Service".
Pressing on/off did not change the status though! Problem?
TMU resources on the MGU are not sufficient. A TMU card (e.g. TMU/2) is needed for a DBC4224 to work on an MX-ONE.
Thursday, January 28, 2016
Monday, January 11, 2016
Teamviewer via 3G and LAN access
Normally, when a Teamviewer connection is established via 3G (or similar), it uses that as the default network route. So reaching anything via the LAN port seems impossible.
However, all that needs to be added is a default route for that specific destination.
Example: Wanting to reach host 192.168.2.10.
Run ipconfig in command prompt. Find your "Local Area Connection" default gateway (e.g. 192.168.4.1).
route add 192.168.2.0 mask 255.255.255.0 192.168.4.1
However, all that needs to be added is a default route for that specific destination.
Example: Wanting to reach host 192.168.2.10.
Run ipconfig in command prompt. Find your "Local Area Connection" default gateway (e.g. 192.168.4.1).
route add 192.168.2.0 mask 255.255.255.0 192.168.4.1
Subscribe to:
Posts (Atom)